Epson Endeavor 468C User Manual
Page 122
3. If you are installing a drive in the lower bay, remove the two
retaining screws securing the metal drive bay cover to the
front of the computer and remove the cover. Store it in a
safe place and save the screws to use later in these steps.
4. If you are installing a 5.25-inch diskette drive, hold it so that
the diskette release latch is above the diskette slot. If you
are installing a 3.5-inch diskette drive or a 5.25-inch dual
drive, hold it so that the diskette release button(s) are on the
right and the drive light is on the left.
If you are installing a hard disk drive, hold it so that the
component side faces down, and skip to step 7.
Installing and Removing Drives