Epson PhotoPC 600 - Manual (Page 93)

Connecting Your Camera to the Printer
Follow these steps to connect the camera to the EPSON
Stylus Photo printer.
1. Make sure that both the camera and the printer are
turned off.
2. Connect one end of the interface cable to the serial
connector on the back of the printer.
Note:
Use the Apple System Peripheral-8 cable (8-pin
mini-circular connector) cable. Do not use the PC
connection cable or Macintosh adapter cable that also
came with the camera.
3. Open the connector cover on the side of the camera.
4. Depending on the type of serial cable you have, line up
either the arrow or the flat surface of the cable
connector with the mark on the camera’s serial port.
Then insert the connector.
c
Caution:
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable’s pins may be damaged.
connector cover
mark
flat surface
arrow
8
R Poppy Rev.B/TCAT
A5 size Chapter 8
97/09/19 pass 2
Using the Direct Print Kit 93