Epson PhotoPC 600 - Manual (Page 64)

Select Photo
1. With the Photo Control menu selected, press the
SELECT button. The Photo Control features appear
on the screen, with the Erase option highlighted in
orange.
2. Press the SELECT button to enter the Erase mode, then
press the or button to choose Select Photo.
3. Press the SELECT button, then press the or
button to move forward or back through the
images in the camera until the photo you want to
erase appears on the screen.
4. Press the SELECT button. An orange frame appears
around the image. If you want to erase other photos
at the same time, use the
or button to display
them, then press the SELECT button to select them.
Note:
❏ To cancel the selection of a photo, simply press the
SELECT button again.
❏ If you select a locked photo, the camera beeps and you
can’t select the photo until you unlock it, as described
on page 65.
5. When you have selected all the photos you want to
erase, press the BACK button. A message appears
asking you to confirm your selections.
6. Press the SELECT button to erase the images and return
to the Photo Control menu; press BACK to return to
the Photo Control menu without erasing the photos.
Erase All
1. With the Photo Control menu selected, press the
SELECT button. The Photo Control features appear
on the screen, with the Erase option highlighted in
orange.
2. Press the SELECT button to enter the Erase mode, then
press the or button to choose Erase All.
3. Press the SELECT button. A message appears asking
you to confirm that you want to erase all photos.
Press the SELECT button to erase the photos and
return to the Photo Control menu; press the BACK
button to return to the Photo Control menu without
erasing the photos.
Note:
If there are locked photos in your camera, a message
appears on the screen before the erase photos confirmation
message. Press the SELECT button to erase only the
unlocked images from the camera.
4
R Poppy Rev.B/TCAT
A5 size Chapter 4
97/09/18 pass 3
Using the LCD Monitor Menus 64