Epson PhotoPC 600 - Manual (Page 20)

2. Double-click the CD-ROM icon. (If you use the
floppy disk version, double-click the floppy disk
icon.)
3. Double-click the File Uploader folder.
Depending on the country, the File Uploader folder may
contain multiple-language versions of the software.
Double-click the folder for your preferred language.
4. Drag the contents of the folder to the folder on your
hard drive where you want to install the software.
Setting the Language
You need to set the language for messages displayed on
the LCD monitor the first time you use it. Depending on
your country, you can choose English, Japanese, French,
German, Italian, Portuguese, or Spanish.
Follow these steps to set the language.
1. Slide the monitor mode switch on the back of the
camera to View or Playback.
A message in English stating that you need to set the
language appears on the LCD screen. Press any of the
monitor control buttons to the right of the screen, or
wait 5 seconds. The language setting screen appears.
2. Press the SELECT button until the language you want is
highlighted.
3. Press the BACK button to save your selection and
return to the View or Playback mode.
If you want to change the language setting, see page 69
for instructions.
Setting the Date and Time
When you install the batteries for the first time or when
you replace them, you need to set the date (year, month,
and day) and time (hour and minute).
After installing the batteries, follow these steps to set the
clock on the LCD monitor and to have the time and date
of each picture automatically recorded.
SELECT button
BACK button
monitor mode switch
1
R Poppy Rev.B/TCAT
A5 size Chapter 1
97/09/18 pass 7
Getting Started 20