Magnum Energy MS-AEJ Series User Manual

Page 42

Page 36

Troubleshooting

4.1 Performing an Inverter Reset

Under some fault conditions (i.e. an ‘internal’ fault) the inverter will need to be reset.
To reset the inverter:

Press and hold the Power ON/OFF pushbutton (see fi gure 4-1) for approximately fi fteen (15)

seconds until the Charging/Inverting Status LED comes on and fl ashes rapidly; once the rapid

fl ashing has begun, release the Power ON/OFF pushbutton. The Status LED will go off after the
pushbutton is released.

After the inverter reset is completed, press the ON/OFF pushbutton to turn the inverter ON.

Info: The Power ON/OFF pushbutton is a small momentary type switch which operates by

lightly pressing and releasing.

Figure 4-1, Performing an Inverter Reset

1. Press and hold the Power ON/

OFF pushbutton.

2. Watch the Charging/Inverting

Status LED, after approximately

15 seconds it should come on

and fl ash rapidly to indicate the

inverter has reset. The Status LED

will go off after the pushbutton is

released.