KACO Powador 3200 - 6600 - Manual (Page 34)

EN EN
Configuration and Operation
Page 34 Operating Instructions for Powador 3200-6600_EN
8.3 Menu structure
Icons used:
1 2 3 1
Menu level (1, 2, 3) Submenu available
Display menu EN Country-specific setting
Option menu DE-NSP Country and grid type-specific setting
Password protected menu (password can be requested from KACO Service)
Enter the four-digit password using key "2". The password is unit-specific.
Coun-
try-spec.
Settings
Menu
level
Display/
setting
Action in this menu/meaning
All countries
1 2 3 Display " Press keys "1" or "2".
1 2 3 1 "Display" menu
" Press key "1" to run through the following menu level
"1".
1 2 3 1 Unit name Displays the unit name of the inverter.
1 2 3 1
Generator
parameters
Displays the current voltage and current of the PV array
that is connected to the inverter.
1 2 3 1 line parameter
Shows the current grid parameters that the unit is feed-
ing into the grid. (Nominal power [W], nominal voltage
[V], grid frequency [Hz] and current [A]).
DE-NSP
BE
1 2 3 1
Mode
Shows the currently selected reactive power mode.
Following modes:
- cos phi (P) : specific characteristic
- cos phi (P) : standard characteristic
- cos phi : x.xxx u (under excited) / o (over excited) (const)
- Q: xx.x % u (under excited) / o (over excited) (const)
- Q=f(U) standard characteristic
IT-CEI021 Additional modes:
- Q=f(U) specific characteristic with 5 nodes
- Q=f(U) specific characteristic with two-state controller
All countries
1 2 3 1
External limitation
(power control)
Menu option is displayed with external active power lim-
itation.
Displays the power control in % steps
(0 %, 30 %, 60 %). In accordance with the requirements of
the German renewable energy act (EEG)
1 2 3 1
Status of the Pow-
ador-priwatt
Menu item is displayed with active Powador priwatt func-
tion and potential-free contact switched.
Displays the active status.
1 2 3 1
priwatt time
remain.
Menu option is displayed with active Powador-priwatt
function and potential-free contact switched.
Shows the remaining runtime in hours and minutes alter-
nating.
priwatt power
remain.
Displays the power available over the threshold range.
1 2 3 1
Powador Protect
status
Status display with installed Powador-protect. (KACO
accessories for grid and system protection)
IT-CEI021
1 2 3 1
SPI status
Status display of the specific "System Protection Inter-
face" (Remote tripping/External signal/local control)