KACO Powador 3200 - 6600 - Manual (Page 33)

EN
Configuration and Operation
Page 33 Operating Instructions for Powador 3200-6600_EN
Selecting menu level "3" (service technician)
↻ The inverter is operating.
↻ The LCD is showing the unit name.
" Press key "2" for 15 seconds.
» The LCD is showing the country-specific parameters.
" Press key "1" repeatedly or press and hold.
» The display runs through menu level "3".
" To return to menu level "1", press keys "1" and "2" simultaneously or wait for one minute without
pressing a key.
Entering password or unlock code
" Key "1" selection of items (1-4).
↻ The LCD shows the selected digits by underlining them.
" Press key "2" to set the value. (0-9, A-F).
↻ The LCD shows the set digits or letters.
" Press "1" to check password.
↻ If the password is correct, the unlocked menu option is displayed.
Saving changed settings
" Press keys "1" and "2" simultaneously to save settings or wait one minute after setting.
» The LCD jumps back to menu level "1".
8.2 Initial start-up
When started for the first time, the inverter displays the configuration assistant. It takes you through the settings
necessary for the initial start-up.
NOTE
After configuration is completed, the configuration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected param-
eter menu.
NOTE
The sequence of the settings required for initial commissioning is preset in the configuration assis-
tant.
Initial configuration
↻ You are in the first start-up.
" Select the menu language.
" Select the country of operation with grid type.
" Press key 1 and confirm with "Yes" that you want to permanently save the country set.
» You have completed the initial configuration. The inverter begins to operate.