Yaskawa VS mini J7 Series - Manual (Page 50)

50
Description of Status Indicator LED’s
There are two LED’s on the middle right section of the face of the VS mini. The
inverter status is indicated by various combinations of the LED’s (ON, BLINKING
and OFF). RUN indicator and status indicator of the button have the same
functions.
For details on how the status indicator LED’s function at inverter faults, refer to
Section 8 “FAULT DIAGNOSIS AND CORRECTIVE ACTIONS” on page 103. If a
fault occurs, the ALARM LED lights.
The fault can be reset by turning ON the fault reset signal (or pressing key
on the digital operator) when the operation signal is removed or by turning OFF
the power supply. If the operation signal is ON, the fault cannot be reset by the
fault reset signal.
RUN
STOP
RESET