SMA SB 240 - Manual (Page 29)

2. Press the four brackets on the back side of the
Sunny Multigate out from the inside.
☑ The brackets snap audibly into place.
3. Mark the drill holes using the brackets as a template.
4. Drill the holes.
5. Insert screws with a maximum head height of
6 mm through the brackets and tighten. Make
sure not to damage the brackets.
6. Make sure that the Sunny Multigate is securely in place.
5 Mounting SMA Solar Technology AG
Installation Manual 29 SMA-SB240-IA-en-12