HEIDENHAIN TNC 640 (34059x-01) ISO programming - Manual (Page 471)

HEIDENHAIN TNC 640 471
1
7.3 T
e
c
hnical Inf
o
rm
ation
Interpolation „ Linear in 4 axes
„ Circular in 2 axes
‹ Circular in 3 axes with tilted working plane (software option 1)
„ Helical: superimposition of circular and straight paths
Block processing time
3-D straight line without radius
compensation „ 0.5 ms
Axis feedback control „ Position loop resolution: Signal period of the position encoder/1024
„ Cycle time of position controller: 3 ms
„ Cycle time of speed controller: 200 µs
Range of traverse „ Maximum 100 m (3937 inches)
Spindle speed „ Maximum 100 000 rpm (analog speed command signal)
Error compensation „ Linear and nonlinear axis error, backlash, reversal peaks during circular movements,
thermal expansion
„ Static friction
Data interfaces „ One each RS-232-C /V.24 max. 115 kilobaud
„ Expanded data interface with LSV-2 protocol for remote operation of the TNC through
the data interface with the HEIDENHAIN software TNCremo
„ Ethernet interface 100BaseT
Approx. 40 to 80 Mbps (depending on file type and network utilization)
„ 3 x USB 2.0
Ambient temperature „ Operation: 0 °C to +45 °C
„ Storage: –30 °C to +70 °C
Accessories
Electronic handwheels „ One HR 410 portable handwheel, or
„ One HR 130 panel-mounted handwheel, or
„ Up to three HR 150 panel-mounted handwheels via HRA 110 handwheel adapter
Touch probes „ TS 220: 3-D touch trigger probe with cable connection, or
„ TS 440: 3-D touch trigger probe with infrared transmission
„ TS 444: Battery-free 3-D touch trigger probe with infrared transmission
„ TS 640: 3-D touch trigger probe with infrared transmission
„ TS 740: High-precision 3-D touch trigger probe with infrared transmission
„ TT 140: 3-D touch trigger probe for tool measurement
Specifications