HEIDENHAIN TNC 640 (34059x-01) ISO programming - Manual (Page 149)

HEIDENHAIN TNC 640 149
5.2 T
ool D
a
ta
Open any other tool table
U Select the Programming and Editing mode of operation
U Call the file manager
U Press the SELECT TYPE soft key to select the file type
U Display the type .T files: Press the SHOW .T soft key
U Select a file or enter a new file name. Conclude your
entry with the ENT key or the SELECT soft key
When you have opened the tool table, you can edit the tool data by
moving the cursor to the desired position in the table with the arrow
keys or the soft keys. You can overwrite the stored values, or enter
new values at any position. The available editing functions are
illustrated in the table below.
If the TNC cannot show all positions in the tool table in one screen
page, the highlight bar at the top of the table will display the >> or <<
symbols.
Editing functions for tool tables Soft key
Select beginning of table
Select end of table
Select previous page in table
Select next page in table
Find the text or number
Move to beginning of line
Move to end of line
Copy highlighted field
Insert copied field
Add the entered number of lines (tools) at the
end of the table
Insert a line with definable tool number
Delete current line (tool)