HEIDENHAIN TNC 640 (34059x-01) ISO programming - Manual (Page 230)

230 Programming: Q Parameters
8.6 Chec
king and Changing Q
P
ar
amet
ers
You can have the Q parameters be shown in the additional status
display in the Manual, El. Handwheel, Single Block, Full Sequence and
Test Run operating modes.
U If you are in a program run, interrupt it if required (for example, by
pressing the machine STOP button and the INTERNAL STOP soft
key). If you are in a test run, interrupt it.
U Call the soft-key row for screen layout
U Select the screen layout with additional status display:
In the right half of the screen, the TNC shows the
Overview
status form
U Press the STATUS OF Q PARAM. soft key
U Press the Q PARAMETER LIST soft key
U The TNC opens a pop-up window in which you can
enter the desired range for display of the
Q parameters or string parameters. Multiple
Q parameters are entered separated by commas (e.g.
Q 1,2,3,4). To define display ranges, enter a hyphen
(e.g. Q 10-14).