HEIDENHAIN TNC 640 (34059x-01) ISO programming - Manual (Page 351)

HEIDENHAIN TNC 640 351
1
1
.5 TCPM FUNCTION (Sof
tw
ar
e Option 2)
Defining the TCPM FUNCTION
U Press the special functions key
U Press the Programming Aids soft key
U Select TCPM FUNCTION
Mode of action of the programmed feed rate
The TNC provides two functions for defining the mode of action of the
programmed feed rate:
U F TCP determines that the programmed feed rate is
interpreted as the actual relative velocity between the
tool point (Tool Center Point) and the workpiece.
U F CONT determines that the programmed feed rate is
interpreted as the contouring feed rate of the axis
programmed in the respective NC block.
Example NC blocks:
...
13 FUNCTION TCPM F TCP ... Feed rate refers to the tool tip
14 FUNCTION TCPM F CONT ... Feed rate is interpreted as the speed of the tool
along the contour
...