HEIDENHAIN TNC 640 (34059x-01) ISO programming - Manual (Page 341)

HEIDENHAIN TNC 640 341
1
1
.3 Inclined-T
ool Mac
h
ining in a Tilt
ed Plane (Sof
tw
ar
e Option 2)
11.3 Inclined-Tool Machining in a
Tilted Plane (Software Option 2)
Function
In combination with M128 and the new PLANE functions, inclined-tool
machining in a tilted machining plane is now possible. Two
possibilities are available for definition:
„ Inclined-tool machining via incremental traverse of a rotary axis
„ Inclined-tool machining via normal vectors
Inclined-tool machining via incremental traverse
of a rotary axis
U Retract the tool
U Activate M128
U Define any PLANE function; consider the positioning behavior
U Via a straight-line block, traverse to the desired incline angle in the
appropriate axis incrementally
Example NC blocks:
IB
Inclined-tool machining in a tilted machining plane only
functions with spherical cutters.
...
N12 G00 G40 Z+50 M128 * Position at clearance height, activate M128
N13 PLANE SPATIAL SPA+0 SPB-45 SPC+0 MOVE SET-
UP50 F900 * Define and activate the PLANE function
N14 G01 G91 F1000 B-17 * Set the incline angle
... Define machining in the tilted working plane