Grass Valley T-POV Bidirectional Robotic - Manual (Page 65)

59
T-POV
User Guide
Connections to the T-POV Camera Unit
This section provides details on both the connectors and signal types that can be applied to
the T-POV Camera Units (T-POV 301 and 324 are illustrated). In the list of connections, it is
noted which connections are applicable to the various T-POV models.
Fig. 5-5: T-POV 301 and 324Camera Unit
T-POV 301 Camera Unit
T-POV 301 Camera Unit
T-POV 301 Camera Unit
T-POV 301 Camera Unit
Item Description
1 Data 1/2 & GPI
DB15: 15 Pin data connector. Used for a variety of serial connections or GPI/Tally
connections.
Applies to T-POV 301
2 & 5 VBS Out
BNC Connector: typically used to send a Genlock/Black Burst signal or SD return
video to the camera (ex.: monitor out from the Production Switcher).
Applies to all models
3 & 8 SDI In
BNC Connectors: HD Video feed from the camera unit to the base station -
typically this is fed to the Production Switcher or primary monitoring
environment.
Applies to all models