Grass Valley T-POV Bidirectional Robotic User Manual
Page 36
30
T-POV 301 Components
T-POV 301 Camera Unit Front Panel Detail - 12 Volt Model
T-POV 301 Camera Unit Front Panel Detail - 12 Volt Model
Area A - Power Section (12 Volt Type)
Fig. 3-17: T-POV 301 Camera Unit Front Panel -- Area A
• 1: POWER - lights Green when the power switch is toggled on.
• 2: 12-18 VDC Power Connection - 4-Pin XLR Female chassis connector for use with an
external power supply such as the ADAP-AC-04 or equivalent
Area B - Optical Power Strength and Diagnostic Display
Fig. 3-18: T-POV 301 Camera Unit Front Panel -- Area B
• 1: DISPLAY SELECT - push button chooses between three modes of operation
When power is turned on, the Camera Unit optical power is first displayed. The first
push of the select button will select the Base Station
Pushingand holding the SELECT button will enter diagnostics, otherwise a quick push
will return to the camera unit display.
• 2: CAM/BASE Indicators - LEDs indicate which unit Optical Power is displayed. Neither
LED is on when the display is in diagnostics mode.
• 3: DISPLAY - optical power is displayed in dBm units and diagnostic information is
alphanumeric. Only Camera Unit diagnostics can be viewed at the Camera Unit (Base
Station diagnostics are not available at the Camera Unit)
For more information on measuring optical power and using system diagnostics please see