Grass Valley T-POV Bidirectional Robotic - Manual (Page 55)

49
T-POV
User Guide
Area D - Fiber Connectors - "Dry" Unpowered Connectors
Fig. 4-21: T-POV 324 Camera Unit Front Panel -- Area D
FIBER CONNECTORS (shown are 2 ST connectors): can be any available unpowered Fiber
Connector depending on user requirements and number of camera units installed. For
additional information, see
Fiber Cable Concepts on page 8 and Product Ordering/Model
Information on page 4 regarding ordering information.
T-POV 324 Camera Unit Front Panel Detail - Powered Model
The T-POV 324 Powered Camera Unit receives power from the Base Station over the Hybrid
Fiber Cable connection. The 12 Volt and Powered version of the T-POV 324 operate
identically with two exceptions. The powered version provides a 12-15 Volt output for
camera and accessory power and the Fiber Connection must of necessity be a Hybrid Fiber
Cable connection.
Area E - 12-15 VDC Power Output
Fig. 4-22: T-POV 324 Camera Unit Front Panel -- Area E
12-15 VDC Power Output: provides up to 95 Watts of 12 Volt power for the camera or
accessories. Please ensure that the total power drain on this source is no more than 95
Watts. For connector wiring information, see
Connector Wiring and Connection on page 78.