T-pov base station variables, T-pov bidirectional robotic, Camera system components – Grass Valley T-POV Bidirectional Robotic User Manual
Page 16
10
System Overview
T-POV Bidirectional Robotic Camera System Components
T-POV Bidirectional Robotic Camera System Components
The T-POV system is comprised of a Base Station and one or two Camera Units. Any system
must consist of Base Station and Camera Units that are of the same model type (ex.: a T-POV
301 Base Station will only work with a T-POV 301 Camera Unit). The same holds true for
each of the T-POV 324 model: you cannot mix and match a 301 with a 324.
To understand the specific capabilities of the two models, please see the following sections
on Signal Paths in the T-POV and the individual chapters on each model type:
•
•
T-POV Base Station Variables
The T-POV Base station variations are summarized in the following table. For additional
information, see
Product Ordering/Model Information
on page 4 or consult with Grass
on page 77) or your Fiber Systems dealer.
Note that "12V" and "95V" refer to T-POV model types. Both externally powered and AC
powered versions of the T-POV provide 12 Volts of power. The powered version additionally
provides 95 Watts of 12 Volt power at the Camera Unit for use by the camera and
accessories. The power is delivered through a Hybrid Fiber Optic Cable as described in
Housing
Number
of Units
Fiber Connector
Power Option
Single - Mini-Mussel
1
ST1, ST2, SMPTE
304M (powered)
12V "dry" or 95V "wet" (power type
dictates Fiber Connector choice)
Rack Mount
1 or 2
ST1, ST2, ST4,
12V "dry"
Rack Mount
1
SMPTE 304M
(powered)
95V "wet"