Grass Valley T-POV Bidirectional Robotic - Manual (Page 48)

42
T-POV 324 Components
T-POV 324 Powered Unit Detail
• Green: high voltage is being supplied to the camera.
Off when there is no high voltage applied to the camera
• CABLE OPEN: indicates that the high voltage cable is open or there is no high
voltage cable connected.
• Green: the cable is properly connected from the Base Station to the camera.
• Red: there no cable connected to the camera, or the cable is connected but
open.
High voltage will not be applied to the camera until the open condition is
corrected.
• CABLE SHORT: indicates that the high voltage cable connected is shorted.
• 3: STATUS INDICATORS
• BASE POWER: indicates the status of all power levels in the Base Station
• Green: all power levels are normal.
• Red: any power level is not normal.
• SYSTEM LOCK: indicates that the Base Station is communicating with the Camera
Unit.
• Green: Base Station is communicating with Camera Unit.
• Red: Base Station is not communicating with the Camera Unit.
• FIBER LINK: indicates the optical power status of the Base Station and camera
• Green: both the Base Station and camera optical power are within a normal
range.
• Red: both the Base Station and camera optical power are not within a normal
range
• Amber: either the Base Station or camera optical power are not within a
normal range.
• ALARM: indicator will light Red if there is a temperature, power, hardware or
firmware fault in the base unit system. The indicator will light Amber if there is a
fault at the Camera Unit.
• Red: there is a Base Station error. Refer to the Base Station DIAG for details on
the error.
• Amber: there is a camera error. Refer to CAM DIAG for details for the error.