Grass Valley T-POV Bidirectional Robotic - Manual (Page 50)

44
T-POV 324 Components
T-POV 324 Base Unit Rear Panel Detail
95 Watt Powered Models
Powered models have either one or two AC power/fiber connection areas depending on
the number of optical link units installed.
Fig. 4-12: T-POV 324 Base Unit Rear Panel -- 95 Watt Model
• 5: AC Power Receptacle: 100-240V 50/60 Hz
• 6: 4 AMP Dual Fuse Assembly: the fuses supplied are standard 4 Ampere fuses - 5 x
20mm. Both fuses are in operation at all times - both the AC Line Hot and the AC Line
Neutral are fused.
• 7: AC Mains Power Switch: this must be turned on for the front panel power switch to
work
• 8: SMPTE 304M Fiber Connector (Powered)
Area E - Data/GPI-Tally Connectors & Ethernet
Fig. 4-13: T-POV 324 Base Unit Rear Panel -- Area E
• 1: DATA 1/2/3/4: provides up to four bi-directional data feeds. Available are Rs232,
RS422 and RS485 data formats.
• 2: 10/100 E'NET: provides an Ethernet connection to the Camera Unit for data or any
network protocol controlled device such as a camera remote control.
Ethernet port is limited to 100BaseT connections. For configuration and wiring
information on all data & GPI connections, see
Connector Wiring and Connection on
page 78.