Grass Valley T-POV Bidirectional Robotic - Manual (Page 27)

21
T-POV
User Guide
Area A - Signal Indicator LEDs
The five LED indicators in this area monitor the various signals being sent to and from the
Camera Unit. LEDs will glow Green when a signal is present.
Fig. 3-2: Signal Indicator LEDs
• 1: SDI OUT - monitors camera video signal returning from the Camera Unit to the Base
Station
• VBS IN - monitors the black burst/sync signal or return video signal being sent to
the Camera Unit
• 2: DATA 1 - monitors data activity on Data Path 1
• DATA 2 - monitors data activity on Data Path 2
• GPI/Tally - monitors GPI/Tally signal activity
Area B - Optical Power Indicator LED
Fig. 3-3: Optical Power Indicator LED
Opt Pwr - When the LED is lit Green, this indicates that the Optical link between the base
station and the camera unit is locked and functioning.
The LED will turn Red if there is a problem with the Optical Link at the Base Station. The LED
will turn Amber if there is a problem at the Camera Unit.