Grass Valley T-POV Bidirectional Robotic - Manual (Page 37)

31
T-POV
User Guide
Area C - Signal Indicator LEDs
The eight LED indicators in this area monitor the various signals being sent to or from the
Camera Unit. LEDs will light Green when a signal is present.
Note: LEDs labeled "IN" indicate signals coming into the camera unit. LEDs labeled "OUT"
indicate signals coming out of the Base Station. If there is neither "IN" or "OUT" associated
with an LED then activity in either the Camera Unit and Base Station is indicated
Fig. 3-19: T-POV 301 Camera Unit Front Panel -- Area C
• 1: SDI IN - monitors camera video signal to the Base Station
VBS OUT (SYNC) - monitors the black burst/sync signal or return video signal being
sent to the camera
• 2: DATA - monitors the two data channels available with the T-POV.
• 3: GPI - monitors GPI/Tally pulse to and from Camera Unit
Area D - Fiber Connectors - "Dry" Unpowered Connectors
Fig. 3-20: T-POV 301 Camera Unit Front Panel -- Area AD
FIBER CONNECTORS - Shown are 2 ST connectors. Can be any available unpowered Fiber
Connector depending on user requirements and number of camera units installed.
For additional information please see Fiber Cable Concepts on page 8 on Fiber Connectors
and Product Ordering/Model Information on page 4 regarding ordering information.