Grass Valley T-POV Bidirectional Robotic User Manual
Page 53
47
T-POV
User Guide
T-POV 324 Camera Unit Front Panel Detail - 12 Volt Model
Area A - Power Section (12 Volt Type)
Fig. 4-18: T-POV 324 Camera Unit Front Panel -- 12 Volt Model
• 1: POWER: lights Green when the power switch is toggled on.
• 2: 12-18 VDC Power Connection: 4-Pin XLR Female chassis connector for use with an
external power supply (such as the ADAP-AC-04 or equivalent).
Area B - Optical Power Strength and Diagnostic Display
Fig. 4-19: T-POV 324 Camera Unit Front Panel -- Area B
• 1: DISPLAY SELECT: chooses between three modes of operation.
When power is turned on, the Camera Unit optical power appears first. The first push of
the select button selects the Base Station.
Pushingand holding the SELECT button will enter diagnostics mode, while a quick push
will return to the camera unit display.
• 2: CAM/BASE Indicators: LEDs indicate which unit Optical Power is displayed. Neither
LED is on when the display is in diagnostics mode.
• 3: DISPLAY: optical power is displayed in dBm units and diagnostic information is
alphanumeric. Only Camera Unit diagnostics can be viewed at the Camera Unit (Base
Station diagnostics are not available at the Camera Unit).
For more information on measuring optical power and using system diagnostics, see