Grass Valley T-POV Bidirectional Robotic - Manual (Page 43)

37
T-POV
User Guide
T-POV 324 Base Unit Front Panel Detail
Area A - Signal Indicator LEDs
The 16 LED indicators in this area monitor the various signals being sent from the Camera
Unit. LEDs will glow Green when a signal is present.
Fig. 4-3: Signal Indicator LEDs
• 1: SDI OUT: monitors camera video signal returning from the camera unit
• VBS IN: monitors the black burst/sync signal or return video signal being sent to
the camera
• 2: E'NET: monitors data activity on the Ethernet connection
• DATA 1/2: Monitors data activity on Data Paths 1 and 2
• DATA 3/4: Monitors data activity on Data Path 3
• GPI: Monitors GPI/Tally signal activity
• 3: AUD- monitors audio activity. All audio is at line level and signals on any of the four
audio channels will activate the LED.
• 4: OPT POWER
• Green: indicates that the Optical link between the base station and the camera unit
is locked and functioning.
• Red: indicates there is a problem with the Optical Link at the Base Station.
• Amber: indicates there is a problem at the Camera Unit.
Icon indicates signal flow
from T-POV Base Station
Unit to Camera Unit Icon indicates signal flow
from T-POV Camera Unit to
Base Station Unit