Grass Valley T-POV Bidirectional Robotic User Manual
Page 38
32
T-POV 301 Components
T-POV 301 Camera Unit Front Panel Detail - Powered Model
T-POV 301 Camera Unit Front Panel Detail - Powered Model
The T-POV 301 Powered Camera Unit receives power from the Base Station over the Hybrid
Fiber Cable connection. The 12 Volt and Powered version of the T-POV 301 operate
identically with two exceptions. The powered version provides a 12-15 Volt output for
camera and accessory power and the Fiber Connection must of necessity be a Hybrid Fiber
Cable connection.
Area E - 12-15 VDC Power Output
Fig. 3-21: T-POV 301 Camera Unit Front Panel -- Area E
12-15 VDC Power Output - provides up to 95 Watts of 12 Volt power for the camera or
accessories. Please ensure that the total power drain on this source is no more than 95
Watts.
For connector wiring information, see
Connector Wiring and Connection
Area F - Fiber Connector
Fig. 3-22: T-POV 301 Camera Unit Front Panel -- Area F
Fiber Connector - SMPTE 304M Hybrid power fiber connection carries signals to and from
the Base Station and 95 Watts of12 Volt power from the base station.