Grass Valley T-POV Bidirectional Robotic - Manual (Page 32)

26
T-POV 301 Components
T-POV 301 Powered Unit Detail
• Green when high voltage is being supplied to the camera.
Off when there is no high voltage applied to the camera
• CABLE OPEN - indicates that the high voltage cable is open or there is no high
voltage cable connected.
• Green when the cable is properly connected from the Base Station to the
camera.
• Red when there no cable connected to the camera or the cable is connected
but open.
High voltage will not be applied to the camera until the open condition is
corrected.
• CABLE SHORT - indicates that the high voltage cable connected is shorted.
• 3: STATUS INDICATORS
• BASE POWER - indicates the status of all power levels in the Base Station
• Green when all power levels are normal.
• Red when any power level is not normal.
• SYSTEM LOCK - indicates that the Base Station is communicating with the Camera
Unit.
• Green when communicating with Camera Unit
• Red when it is not communicating with the Camera Unit
• FIBER LINK - indicates the optical power status of the Base Station and camera
• Green when both the Base Station and camera optical power are within a
normal range.
• Red when both the Base Station and camera optical power are not within a
normal range
• Amber when either the Base Station or camera optical power are not within a
normal range
• ALARM - Indicator will light Red if there is a temperature, power, hardware or
firmware fault in the base unit system. The indicator will light Amber if there is a
fault at the Camera Unit.
• Red if there is a Base Station error. Refer to the Base Station DIAG for details on
the error.
• Amber if there is a camera error. Refer to CAM DIAG for details for the error.