Grass Valley T-POV Bidirectional Robotic - Manual (Page 28)

22
T-POV 301 Components
Base Unit Front Panel Detail
Area C - Signal Strength & System Setup Display
Fig. 3-4: Signal Strength & System Setup Display
• 1: SELECT - selects between three modes of operation. When power is turned on, the
unit defaults to BASE RX display mode.
• BASE RX - indicates display mode is Optical Link signal strength received at Base
Station from Camera Unit
• CAM RX - indicates display mode is Optical Link signal strength received at Camera
from Base Station
• DIAGNOSTIC - displays various alphanumeric readouts
• 2: DISPLAY - indicates which unit Optical Link level is being displayed. Neither LED is lit
when the unit is in diagnostics mode.
• 3: Digital Display - indicates Optical Link signal strength in dBm units. Also diagnostic
information when Base Station is in diagnostics modes.
For additional information on both measuring optical link strength and T-POV
diagnostics, see
A Brief Guide to Measurement of Fiber Optic Signal Strength on
page 64 and The T-POV Base Station Digital Display on page 65.
Note: Pushing and holding the SELECT button will enter diagnostics mode, while a
quick push will return to the Base Station display. Only Base Station diagnostics appear
on the Base Station; you must be at the camera unit for camera unit diagnostics. The
ALARM STATUS LED (see
Area D - Power/Status Indicators and Power Switch on page 23 )
will light Amber if there is a problem with the Camera Unit.