Grass Valley NewsBrowse Desktop Browsing System Installation v.3.1 - Manual (Page 83)

April 27, 2006 NewsBrowse Installation and Configuration Guide 83
Advanced encoder stand-alone stage
3. On the Advanced encoder, click Start | Programs | Thomson | NewsBrowse |
Diagnostic Tools | Proxy Transfer Client . The Proxy Transfer Client application
opens.
4. Configure as follows to check the connection:
• Host: localhost
• Port: 9230
5. Click Connect . Verify that the “…Update…” and “…Transfer…” buttons become
enabled, which means the connection is successful.
6. Configure as follows to define the MPEG source on the NAS:
• Source Type: Select Proxy .
• MDI Name: Select the logical name of the Proxy MDI.
• MDI Type: Select device/proxy .
• Location: Select the directory on the NAS that holds the test proxy MPEG.
• Clip Name: Select the test clip.