Grass Valley NewsBrowse Desktop Browsing System Installation v.3.1 - Manual (Page 174)

174 NewsBrowse Installation and Configuration Guide April 27, 2006
Appendix B Legacy systems
Configure Ingest Scheduler: NewsBrowse server
The page defines resources available and operating parameters for ingest jobs.
Add the encoder as an ingest channel.
For “Video/Audio Router…” settings, refer to “Add Router Gateway to Ingest
Scheduler” on page 181 . If you are configuring the basic Encoder + Server stage, do
not yet configure these settings.
B
a
sic
A
d
vanc
ed
D
o not
mo
di
fy
http://localhost:280 Ingest Scheduler Scheduler Open this page locally on the NewsBrowse server.
! Number of previous days of ingest history
! Minimum back-to-back delay in seconds between records on the same channel.
Default value is 29.
! Machine name of Router Gateway.
! 8065 required.
! ! Saves changes. Changes are lost if you leave the configuration page without
updating.
! Select the logical name for the encoder. This specifies the encoder as an ingest
channel.
! Enter a useful name for the channel. This is displayed in the NewsBrowse
application.
! Adds the above specified encoder as an ingest channel
Currently added ingest channels
! Removes the currently selected ingest channel
! Adds the selected date suffix automatically to high-res clips
! Adds the selected time suffix automatically to high-res clips
! Saves date stamp and time stamp changes
Always click Update… buttons after making changes
To put changes into effect, start or restart the Thomson Ingest Scheduler
service.