Grass Valley NewsBrowse Desktop Browsing System Installation v.3.1 - Manual (Page 52)

52 NewsBrowse Installation and Configuration Guide April 27, 2006
Chapter 3 Configuring the NewsBrowse System
6. Click Set Administrator Password .
Set a password according to the customer site requirements. Click OK to save
settings.
7. Click Network | Interfaces . If required by the customer site network, change IP,
DNS, and WINS settings. A recommended configuration is to use the Gigabit port
for the Client network, use LAN Port 1 for the Production network and leave LAN
Port 2 at the default static IP for system maintenance access. For systems with a
Production network consisting of a media network and a control network, use LAN
port 1 for the media network and LAN port 2 to for the control network.
8. Click Administration Web Site . If required by the customer site security policies,
change the IP addresses and/or ports for encrypted and non-encrypted access used
to access the administration Web site. If you make a change, click
OK and then
reconnect via the new port and/or IP address.
9. Click Shares | Folders . Share the media directory as follows:
a. Select New Volume (E:)
b. Click Manage Folders .
c. Select media .