Grass Valley NewsBrowse Desktop Browsing System Installation v.3.1 - Manual (Page 110)

110 NewsBrowse Installation and Configuration Guide April 27, 2006
Chapter 3 Configuring the NewsBrowse System
associated with this asset. This can be done by looking at the Related tab in the
details page. By using the mouse to hover over the entries in the related tab you can
derive where the asset components exist in the system.
2. From the general tab on the details page edit the expiration date and select a date
in the past.
3. The purge process polls at configured intervals. To expedite testing go to the
Windows services panel and restart the Asset Manager process. This will cause the
cycle to be reset and assets meeting expiration criteria will be processed
immediately.
4. Refresh the search results list by pressing the go button with no criteria specified.
5. Verify that asset components noted earlier no longer exist in the system. You will
have to look at the NAS for the specific paths to proxy asset components. The asset
on the high-res storage should also be removed.
Add NewsBrowse Clients
Do the following tasks to enable PCs to act as a NewsBrowse clients and run the
NewsBrowse application.
• “Connect server and NAS to customer LAN” on page 110
• “Set up client PCs” on page 111
• “Configure NewsBrowse Licenses” on page 111
• “Testing NewsBrowse client operations” on page 118
Connect server and NAS to customer LAN
The NewsBrowse server and NAS machines must have network access to the external
LAN of the NewsBrowse client PCs. Work with the IT personnel at the customer site
to configure Domain, DNS suffix, or any other settings required by the site’s LAN.
Also, make sure that permissions are correct for access to the NewsBrowse server
website, which serves the NewsBrowse application. The website uses Integrated
Windows Authentication.
Continue with the next procedure “Set up client PCs” .