Grass Valley NewsBrowse Desktop Browsing System Installation v.3.1 - Manual (Page 49)

April 27, 2006 NewsBrowse Installation and Configuration Guide 49
Prepare for core configuration stages
8. At the iSCSI Initiator Configuration screen, enter client bandwidth:
a. Click Modify .
b. Enter the total bandwidth requirement for this encoder machine. (For
instructions see the next section, “Calculating encoder bandwidth” on page 50 ).
c. Click Assign TOE .
9. Click Next .
10. At the Completing the Configuration Wizard screen, click Finish .
The wizard closes and the encoder reboots.
11. Repeat this procedure for each Advanced encoder or SmartBin encoder that is an
iSCSI client on the K2 Storage System.