Grass Valley NewsBrowse Desktop Browsing System Installation v.3.1 - Manual (Page 173)

April 27, 2006 NewsBrowse Installation and Configuration Guide 173
Configure ASK Location: NewsBrowse server
Configure ASK Location: NewsBrowse server
This page tells the NewsBrowse server where to look for the ASK service. Since the
ASK service runs on the NewsBrowse server, you enter localhost for the ASK host
location. On all other machines you must enter the name of the NewsBrowse server.
Configure Media Frame Core ASK: Single-channel encoder
Make sure the single-channel encoder’s Ingest Control service is registered with the
ASK software component with a logical name, as explained in
“Configure Media
Frame ASK: Register components” on page 60 .
B
a
sic
A
d
v
ance
d
D
o
not mo
di
fy
http://localhost:280 ASK Location Open this page locally on the NewsBrowse server machine.
! Enter localhost , since you are configuring on the NewsBrowse server itself.
! Port 9010 is required. See “Ports and services mapping” on page 40 .
! Saves changes. Changes are lost if you leave the configuration page without
updating.
Always click Update… buttons after making changes
It is not necessary to restart a service to put these settings into effect.