Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 95)

Chapter 7 Viewing System Information
94 Digital News Production
Event Log
To view the event log, choose System | System Information | Event Log . The
Event Log window appears. You can also save the log to another file and clear
the log. The event log holds one megabyte of data. When it is full, new events
are written over the oldest events.
The event log contains events for each server node and descriptions of fields:
Field Description
Event ID A sequential number assigned by the system as events are logged.
Time/Date Date and time at which the event occurred.
Private IP The address of the NewsShare NAS server node that reported the event.
Configured
Master or
Slave During the original configuration, one server node is designated as the master
and the other as the slave. Although circumstances can change which node is
master and which slave, this field always reflects the original configured state of
the node reporting the event.
Software
Module The software module in which the event message was generated. (For use by
development engineers.)
Code
Address Within the above software module, this is the address at which the event message
was generated. (For use by development engineers.)
Severity
Level The severity level of an event can be Info, OK, Warning, or Critical. Warning
and Critical events indicate system problems. Info and OK events are included
in the log to provide context for the serious events.
Description This describes the logged event.