Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 117)

Chapter 9 Network Administration
116 Digital News Production
Configuring Network Ports
Network port configuration depends on whether you have a dual node or a
single node system.
Configuring Dual Node Network Ports
To view and modify the network port configuration for a dual node NewsShare
NAS system, choose Network | Configure Network Ports . The Network Port
Configuration window appears:
Enter the IP address that attaches NewsShare NAS to the existing network. (If
NewsShare NAS is not attached to an existing network, do not change the
values on this window.)
Step A. Enabling Jumbo Frames
(Optional) Enable jumbo frames. Click on the check box to enable jumbo
frames (or to disable them when already enabled). Using standard frames, the
packets sent through the network are 1.5K. Using jumbo frames, the packets
sent through the network are 9K. Jumbo frames improve performance.
When setting new IP addresses on this window, the following requirements
must be met: