Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 167)

Chapter 11 Field Replaceable Units (FRUs)
166 Digital News Production
2. Unseat the canister by pushing down on the ejector levers.
- Slowly press the levers down, as shown in Steps 2 and 3. The ejector lever
acts as a fulcrum to ease the board away from the midplane.
- When the board is detached from the midplane, ease it out of the slot.
3. Pull the canister module out of the enclosure.
To insert the canister, do the following:
1. With the two levers straight out, insert the replacement canister into the
empty bay, as shown in Step 1 below. Carefully seat the board as smoothly
as possible to avoid faults caused by intermittent connections.