Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 111)

Chapter 8 System Administration
110 Digital News Production
9. After Node 1 comes back online, enable the controller on the new node
(using the Storage | RAID System | Controller | Add/Remove window),
and power-on the new node. The new node acquires all its configuration
information as it boots. It then joins the system as Node 2. For Windows NT
domain level security, follow the procedures for section titled Joining the
New Server Node to the Domain.
Joining the New Server Node to the Domain
When upgrading to a dual-node server, follow these steps to complete the
process of joining both server nodes to your Primary Domain Controller (PDC).
1. After using the Upgrade window, the original node reboots. At this point,
connect the new server node and power it up.
2. On the domain controller, remove the existing computer name from the list.
Then add both the original node and the new node names to the list.
3. Using the NewsShare NAS software, choose System | System Services |
Security Configuration - SMB/CIFS (see “SMB/CIFS” on page 74), and
select the Domain Level Security option. Rejoin the domain by specifying
the PDC and the other fields in this window.