Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 132)

Loop Bypass Board Information
Digital News Production 131
Loop Bypass Board Information
To view Loop Bypass Board (LBB) information, click on an LBB icon in the
RAID Logical/Physical View window. The LBB window appears:
The LBB window describes the fields for the loop bypass board:
Field Description
Status Status can be OK, Critical or Not Available.
WWN Worldwide name of the loop bypass board.
Firmware Revision The firmware revision in the format: xxx mm/dd/yy hh:mm:ss,
where xxx = compile counter, mm/dd/yy = compile date, and
hh:mm:ss = compile time.
Hardware Revision The hardware revision of the loop bypass board.
Link
Speed
The actual link speed can be one gigabit Fibre Channel or two
gigabits Fibre Channel.
Current Temperature The current temperature in degrees Celsius.
Temperature Sensor State State can be:
• OK: The current temperature is below the warning temperature
setting.
• Over Warning Temperature: The current temperature is at or
above the warning temperature setting and below the critical
temperature setting.
• Over Critical Temperature: The current temperature is at or above
the critical temperature setting.