Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 89)

Chapter 6 Users and Groups
88 Digital News Production
NOTE: If you add users before you add groups, there is no list of
groups from which to choose. In that situation, bypass this window.
When you create a group (as shown in “Deleting Groups” on page
91), you can add existing users to it. The group can only be a user’s
secondary group. To add a primary group, use “Changing Users” on
page 89.
7. To specify a user's primary group, from the list of available groups on the
left, click on a group name. Click Add (in the Primary box) to make this
group the primary group for this user. You must have one primary group. If
you change your mind, repeat this step, selecting a different primary group.
8. (Optional) To specify the secondary groups, from the list of available
groups on the left, click on a group name. Click Add (in the Secondary box)
to create a secondary group for this user. If you change your mind, click
Undo (in the Secondary box) to remove the user from the group.
9. Repeat the previous step for each secondary group to which you want this
user to belong.
10. Click Save .