Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 49)

Chapter 3 Software Setup
48 Digital News Production
For Port 2, these addresses must be on the same subnet:
• Node 1, Private IP address
• Node 2, Private IP address
Port 0 and Port 2 IP addresses cannot conflict. They must be in different
subnets.
Step B. Configuring Node 1
1. Enter the Port 0 Public IP address. This is the address of the network server
node.
2. Enter the Port 0 Private IP address. The Private IP address is the address that
server nodes use to query each other.
3. Enter the Port 0 Netmask . This is also the Port 0, Node 2, netmask.
4. Enter the Port 2 Private IP address. The Private IP address is the address that
server nodes use to query each other.
5. Enter the Port 2 Netmask . This is also the Port 2, Node 2, netmask.
Step C. Configuring Node 2
1. Enter the Port 0 Public IP address. The Public IP address is the address of
the server node on the network.
2. Enter the Port 0 Private IP address. The Private IP address is the address that
server nodes use to query each other.
3. Enter the Port 2 Private IP address. The Private IP address is the address that
server nodes use to query each other.
Step D. Saving the Configuration
To save the changes, click Next .