beautypg.com

Step a. enabling jumbo frames – Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 User Manual

Page 48

background image

Configuring Dual Node Network Ports

Digital News Production

47

Step A. Enabling Jumbo Frames

(Optional) Click on the check box to

enable jumbo frames

(or to disable them

when already enabled). Using standard frames, packet size is 1.5K. Using
jumbo frames, the packet-size is 9K. Jumbo frames improve performance.

NOTE: For information on using IP addresses in a network, refer to
“Basics of IP Addresses” on page 42.

When setting new IP addresses, the following requirements must be met:

For Port 0, these addresses must be on the same subnet:

• Node 1, Public IP address

• Node 1, Private IP address

• Node 2, Public IP address

• Node 2, Private IP address

See also other documents in the category Grass Valley Equipment: