Adding users – Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 User Manual
Page 88
Adding Users
Digital News Production
87
Adding Users
From the User/Group menu, choose
Add User
. The Add User window appears.
Identify users to NewsShare NAS so that files and information can be accessed
by these users.
1. Enter the
user login name
. This is required. The maximum length is 32
characters. The name cannot start with digits. Use only alphanumeric,
underscore, or dash.
2. Enter a
user ID
or let NewsShare NAS assign a user ID. This field is
required. Valid IDs are (500 through 65533). If the entered or assigned
number is already assigned to a user, an NIS user, or a PDC user, the add
fails. Use the “Viewing the User/Group List” on page 92 to locate free IDs.
3. Enter the
full name
of the user. This is required. Use a maximum of 61 valid
characters. (See “Restricted Input Characters” on page 169.) The first
character cannot be a digit. Periods are not accepted. Spaces are allowed
anywhere except the beginning or end of the field.
4. Enter a
password
for the user. This is required. Use a maximum of eight
characters.
5. Re-enter the user
password
. The two password entries must match.
6. Click
Next
. The Add User to Group window appears: