Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 User Manual
Page 126
RAID System Logical/Physical View
Digital News Production
125
A loop failure is indicated on the RAID system icon. For example, if loop A
fails, LBB A remains green but the RAID A icon turns yellow.
1. Enter the
refresh
interval. In the text box, type the number of seconds for the
window refresh interval. Information on this window is updated once per
refresh interval.
2. View logical information. On the left side of the window, the logical units
are listed. The list includes the size, in gigabytes, of the logical unit and the
status of the logical unit. Click on a
logical unit
3. View physical device information. On the right side of the window, the
physical devices are shown graphically. The front view of an array shows
disk drives and disk enclosures. The back view shows other physical
components. Physical views are:
- Disk drives are represented by small rectangles in the front view on the
right side of the window. Click on a
disk