Freeing spares, Disabling a disk drive, Freeing spares disabling a disk drive – Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 User Manual
Page 154

Disk Drives
Digital News Production
153
Freeing Spares
Use the Free Spares window to designate one or more spare drives as free
drives. Access the window from the Storage menu by choosing
RAID System
| Disk Drive | Free Spares
. Free drives are not available for rebuilding a logical
unit.
1. Specify one or more disk drives. Click on each
disk drive
to be made into a
free drive.
2. To make the selected disk drives free drives, click
Save
.
Disabling a Disk Drive
Before you can replace a drive in the array, it must be disabled. When the array
system determines that a drive is bad, it disables that drive. If you choose to
upgrade a drive for any reason, you must disable it, and then you can replace it
physically.
>>> Do not remove a drive unless the controller failed it (light on drive blinks an
alternate blue), or you disable it through the NewsShare NAS software.
Removing a drive without following the drive failure procedure can cause
loss of data.