Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 55)

Chapter 3 Software Setup
54 Digital News Production
2. If you have an SNMP manager running on a host, enter the IP address of the
SNMP server for Host 1 and/or 2 for either SNMP Version 1 or SNMP
Version 2. Both versions of SNMP report error conditions. SNMP2 is an
updated version that has better security, automatic continuous feedback, and
potentially provides more error information. NewsShare NAS will send
event notices to that host.
3. Choose the severity level you want to trigger event notification:
- Warning and Critical (default): A warning event is less serious than a
critical event. The system is still operating. As soon as it is convenient,
provide administrative attention.
- Critical: A critical event may render the system inoperable. Immediate
attention is required.
4. Click Next to proceed or Back to return to the previous window.
SMTP
The SMTP window appears either as part of Setup, or by choosing System |
System Services | SMTP . Simple Mail Transfer Protocol (SMTP) is a protocol
for sending e-mail messages between servers. Most e-mail systems that send
mail over the Internet use SMTP to send messages from one server to another.
1. Enter the IP address of the mail server .
NOTE: For information on using IP addresses in a network, see
“Basics of IP Addresses” on page 42.
2. Enable or disable SMTP .