Grass Valley JEP Series v.1.3.0 - Manual (Page 80)

Left signal on Left channel
Right signal on Right channel
Normal" =
Left" = Left signal on Left channel
Right signal on Right channel
Right signal on Left channel
Right" =
Left + Right signals on Left channel
Left + Right signals on Right channel
Mix" =
Right signal on Left channel
Left signal on Right channel
Reverse" =
Left signal on Right channel
80 JEP Series — Installation Manual
Section 2 — JEP-100 CP Operation
8. Press the TAKE button.
9. The last selected Audio mode will remain in effect until explicitly
changed by the operator.
DspAMod. - Display Audio Mode (Special Stereo Switching)
This mode provides a method of checking the Audio mode that is presently
in effect.
1. Press MENU.
2. Use UP/DOWN to display "DspAMod?" meaning that this is the mode that
will be selected if the TAKE button is pressed.
3. Press the TAKE button.
The Preset window will display "Pair 1," referring to the first two audio
levels listed in the Jupiter CP Level Set; e.g., Left and Right.
4. If this is the preferred pair, press the TAKE button. If not, use UP/DOWN to
select the appropriate audio pair, and then press the TAKE button.
The current Audio mode for the selected pair will be shown.
5. Press CLEAR to exit.