Mpk table entries – Grass Valley JEP Series v.1.3.0 User Manual
Page 51

JEP Series — Installation Manual
51
Configuration - Jupiter System
MPK Table Entries
Although the JEP is not actually an MPK-type panel (it has an on-board
microprocessor and does not use the Message Per Keystroke protocol), the
MPK table is used for configuration purposes. An example is shown in
.
Figure 28. MPK Devices table corresponding to system shown in Figure [12]
MPK Devices
- This column is used to create a name, up to eight characters
in length, for each JEP-100. This name must be unique system-wide.
Type
- Select type “ES-LAN” on the pull-down menu. Select either
“CPESXTND” or “CPES-SER” type for the latest features.
Expansion
- Not used for JEP-100 (leave unchecked).
Password
- The panel may use the password level entry to enable or disable
certain control panel features.
•
If the password is blank, the panel will act as normal.
•
If any number from 1 to 89 will disable button assignments, and the
“Change ID”, and connection type menu items.
Board
- Name of CM-4000 or CM-4400 associated with this JEP-100. The
source of this name is the Network Description table.
Port
- Not used for LAN-only installation.
Address
- Panel address from 01 to 64. Must be unique for panels associ-
ated with the same CM-4000 or CM-4400.
JEP-100 panels are normally shipped with a panel address of “01.” Modifi-
cation of this address was discussed on
.
This number is referred to as the “Device Number” on the IP configuration
page and “ID” within the JEP-100 MENU system.
Input Set
- Name of CP Input Set to be assigned to this panel. The usual
practice is to have one CP Input Set, containing the names of all inputs,
apply to all panels. However, special CP Input Sets could be created which
list only selected inputs; such a set could be used to prevent certain panels
from selecting specific inputs.
The panel now uses the CPEXTN type input set.
JEP1
ES LAN
01
JEP2
ES LAN
02
1
MPK Devices
MPK
Expansion
Pass
Board
CM1
Port
Address
Input Sets
Output Sets
Level Set
Overide Set
Sequence Set
2
CM1
KXYZ INP
KXYZ OUT
KXYZ LEV
Devices
word
In Panel
Out Panel
JEP64
ES LAN
64
64
CM1
KXYZ INP
KXYZ OUT
KXYZ LEV
KXYZ INP
KXYZ OUT
K
KXYZ LEV
Type
Device
8536_03