Grass Valley JEP Series v.1.3.0 - Manual (Page 64)

64 JEP Series — Installation Manual
Section 2 — JEP-100 CP Operation
Level Breakaways (Split Switching)
This function allows different sources to be selected for different levels. For
example, switching video without switching audio.
Note Breakaway in v1.1.1 includes a method similar to that used for the Jupiter CP-
300/330 panels. With this method, levels are selected first; when the source
is selected with a button-per-source (BPS) key, the switch is executed.
There are two breakaway methods available:
• Default mode - level names are scrolled in the Level window and
toggled on/off before the switch is made.
• Button-per-level mode - levels are assigned to specific buttons and
toggled on/off before the switch is made. A level can be assigned to
one of the 96 keys on the left side of the panel or one of the top six
keys on the right side of the panel.
Default Mode Breakaway
1. LEVEL button - ON.
2. Select the wanted levels:
a. Use UP/DOWN to step to the first wanted level.
b. Press ASSIGN/SELECT to toggle the level on/off. Dashes in the Level
window mean the level is de-selected.
c. Repeat as needed for remaining levels.
3. Select the preferred input:
–Press one of the button-per-source (BPS) keys on the left side of the
panel (which immediately completes the switch), or
–Toggle the SOURCE button ON , and use the UP/DOWN buttons to find a
source in the Preset window. Press the TAKE button to complete the
switch. Toggling
SOURCE to OFF will exit.
As long as LEVEL is ON, the panel will remember the breakaway level(s) pre-
viously selected and switch accordingly. When LEVEL is OFF, the panel will
revert to All Level switching.
Checking Status of Selected Level
Press CLEAR . With the LEVEL button ON, press UP/DOWN to step to the pre-
ferred level. The status of the selected level will be shown in the Status
window.