Grass Valley JEP Series v.1.3.0 User Manual
Page 41
JEP Series — Installation Manual
41
Updating to the Latest Software Version
Selecting the Files to Download
1.
Double click the first control panel to upgrade.
2.
Select the
Download
tab at the top of the dialog.
The order of the following steps is very important. The backup file
JEP100backup.bin must be added as the first file in the list.
3.
Select the
Add File
button in the left margin and navigate to C:\program
files\grass valley\jupiter control panels\jep100\...then select the
JEP100backup.bin file.
This file is used as a secondary application in the event that the primary
application should ever fail, and allows you a way to re-load the soft-
ware using the NetConfig application again in if the primary applica-
tion fails.
4.
Select the
Add File
button in the left margin again and navigate to
C:\program files\grass valley\jupiter control panels\jep100\... to
select the JEP100.bin primary file.
Figure 19. Selecting the Backup and Bin Files
Assigning Primary and Backup Status to the files
1.
Highlight the JEP100backup.bin file and then select the
Set Backup
button in the left margin to set Backup file.
2.
Highlight the JEP100.bin file and then select the
Set Primary
button in the
left margin to set Primary file (
).