Grass Valley JEP Series v.1.3.0 - Manual (Page 77)

JEP Series — Installation Manual 77
Menu Functions
The various menu modes are entered by selecting MENU, then UP/ DOWN to
scroll to the preferred item in the Preset window.
In general, the window describes what will happen if the TAKE button is
pressed. For example, "Alm. on?" means that Alternate mode will be turned
On by pressing the
TAKE button.
AlM. - Alternate Mode
Alternate mode may be useful when all 96 buttons to the left of the status
displays have been assigned to inputs, outputs, or levels and the operator
wants to make additional assignments on a temporary basis. Alternate
mode allows the top six buttons in the right-hand button cluster to be used
for this purpose. For example, the buttons could be used for level selection
during breakaway switching.
See Section 5: The Configurator Application in the CM-4400 Jupiter manual
for the steps needed to make these button assignments. Button assign-
ments
must be made prior to entering Alternate mode:
• Assigning a source
• Assigning a destination
• Assigning a level
Alternate mode operation
1. MENU button - ON .
2. Use UP/DOWN to display "Alm on" (Alternate mode On), meaning that
this is the mode that will be selected if the TAKE button is pressed.
3. Press the TAKE button.
This activates the six "temporary level" buttons (the outlined but tons
in Fig. Lighted buttons initially indicate defined levels.
Figure 39. Example of the Six "Temporary Level" Buttons
4. Select the new input.
5. Toggle OFF the level(s) you don't want to switch.